05 level of significance. Results: Peak loads for two provisional cements and

a resin-modified glass ionomer cement ranged from 56 N to 127 N. Peak loads for two resin cements ranged from 184 N to 318 N. Two-way ANOVA showed significant effects upon retentive forces for both the cement and abutment design. Post hoc Fisher’s PLSD multiple comparisons test found significant differences in retention for 7 of the 10 pairings of cements at a 0.05 level of significance. In addition, Fisher’s PLSD multiple comparisons test found significant differences between Astra Tech Direct Abutments 4 and Astra Tech Direct Abutments 5 as well as Astra Tech Direct Abutments 4 and Astra Tech Direct Abutments 6 at a 0.05 level of significance. No significant difference was found between Astra Tech Direct Abutments 5 and Astra Tech Direct Abutments 6. Conclusions: Of the five cements tested, the most retrievable CAD/CAM restorations

SAHA HDAC concentration were luted with Temp Bond NE and Improv Temporary Cement. Resin-modified glass ionomer retentive forces were closer to those of the “temporary cements” than those of the permanent adhesive-resin cements. The abutment surface area became less important when using adhesive-resin cements. Retention of CAD/CAM all-ceramic FK506 research buy restorations to prefabricated abutments has not been reported in the literature. This in vitro study demonstrated clinically significant variation among the selected cements used to retain all-ceramic CAD/CAM restorations to implant abutments. In addition, abutment size influenced the retention of all-ceramic CAD/CAM restorations. “
“For more than 25 years, computer-aided design and computer-aided manufacturing (CAD/CAM) technology has been used in implant restorative dentistry. Today this technology offers a means of milling titanium frameworks that fit dental implants accurately. This report presents a restoratively driven protocol employing advanced implant restorative selleck products and surgical techniques. Treatment of a patient with advanced periodontitis with extensive loss of hard and soft tissues

is presented. After extraction of the patient’s remaining hopeless teeth, dental implants were placed, along with interim, fixed-margin abutments and abutment protection caps. Two days later, acrylic resin fixed-interim prostheses restored the patient’s esthetics and partial masticatory function. After implant osseointegration, maxillary, and mandibular frameworks for definitive prostheses were milled from Ti alloy, using one specific CAD/CAM technology. The benefits of this technology are also discussed. “
“Prosthetic rehabilitation with an obturator for a total or subtotal maxillectomy patient is a challenging task, as there are little or no residual maxillary structures to depend on for support, retention, and stability of the prosthesis.